Back

Ados 123

EPS energy absorbing side pads,
headrest and harness with
simultaneous adjustment in height.

Ados 123

EPS energy absorbing side pads, headrest and harness with simultaneous adjustment in height.

Ados

Group 1 2 3

9 - 36 Kg.

From 9 months to 12 years

ADOS is a very easy to install car seat thanks to the combination of Isofix connectors and Top Tether anti-rotational system. The seat can be used with a wide range of ages, from approximately 9 months to 12 years. When the child is 3 to 4 years old the harness can be removed and the seat used for the group 2/3 age group.

Colours: Black-beige / Black-grey

Isofix + Top tether

For Group 1, the seat combines
the universal Isofix anchorage system with
a third top tether anchorage point that limits
the rotational movement of the seat.

Isofix + Top tether

For Group 1, the seat combines
the universal Isofix anchorage system with
a third top tether anchorage point that limits
the rotational movement of the seat.

SIPS.
Side Impact
Protection System.

SIPS.
Side Impact
Protection System.

Height adjustable
headrest and harness

Adjustable headrest and harness with
easy single handed adjustement
that prevents rethread errors.

Height adjustable
headrest and harness

Adjustable headrest and harness with
easy single handed adjustement
that prevents rethread errors.

Reclining positions

With 3 reclining positions that
can be adjusted at any moment
so the child travels comfortably
either asleep or awake.

Reclining positions

With 3 reclining positions that
can be adjusted at any moment
so the child travels comfortably
either asleep or awake.

Evolutive system

Once the harness is removed, the seat
can be used as normal group 2/3.

Evolutive system

Once the harness is removed, the seat
can be used as normal group 2/3.

Installation

Car seat instructions manual.

Download manual

For a safer journey

Tips to keep in mind.

  • The advantages of ISOFIX anchoring system

    It is a anchorage system provided by certain models of automobiles. The ISOFIX system was created to simplify the installation of the child car seats (group 0 + and 1), avoiding the use of safety belts for anchoring. This system reduces the risk of misuse and ensures a safe installation.

  • Anti-rotation systems

    Isofix anchorage system is enhanced with two devices that prevent forward rotation of the car seat on the event of an impact. 

    Top Tether is a seat belt attached by the upper part to a vehicle-specific anchor. It is valid only for group 1 car seats. Although there are few models with this support it is usually placed in:

    • The vehicle roof in the rear.

    • Behind the rear seat backs.

    • Under the rear seats.

    • In the trunk.

    Support Leg is a rigid support with "L" shape which is anchored to the car seat and reaches the floor of the vehicle. This support leg prevents the seat from rotate forward in a collision. Fits seats of type 0 + and 1, even when mounted rear or forward facing. It is used in vehicles that do not have a "Top Tether" anchor.

  • How to choose the proper car seat

    It is always important to choose the safety device according to their height and weight. The child seats are classified by the weight of the child.

  • Which is the safest position to install a car seat?

    The rear and middles seats provided with three-point belts are the safest to install a child restraint system. If the vehicle has more than two rows of seats, the seat should be installed in the middle row to reduce the effect of impacts from any side of the car.

  • Travelling with various Kids

    Spanish law indicates that children under 18 years of age with a height equal  or less than 135 centimeters should travel in rear seats. Outstandingly, they will be able to install this item in the front seat in the following cases (always using the safety seat according to ECE R44/04 standards):

    • Whenever the vehicle does not count with rear seats. 

    • When all rear seats are already occupied by children shorter than 135 cm height.

    • When it is not possible to install all child restraints systems in the rear seats.

  • Fitting the seat to the child's size

    Proper adjustment of the height of the harness ensures the child will be seated correctly. The harness should be adjusted to the height of the child’s shoulder or slightly above; never behind the child’s back or level with the ears.

  • Advice for a proper care
    • Removable cover.
    • Machine wash, cold (30º).
    • Do not bleach.
    • Dryclean, any solvent except trichloroethylene.
    • Do not tumble dry.
    • Do not iron.